A carregar...
Publicação
Shear traction‐separation laws of European beech under mode II loading by 3D digital image correlation
| Nome: | Descrição: | Tamanho: | Formato: | |
|---|---|---|---|---|
| 2.48 MB | Adobe PDF |
Orientador(es)
Resumo(s)
An experimental and numerical study on mode II fracture behaviour of European beech (Fagus sylvatica L.) in the RL and TL crack propagation systems is performed. It is a hardwood species that has attracted increasing interest for structural use in Europe in recent years. Three-point end notched flexure tests are performed. The R-curves of both crack propagation systems are obtained, from which the critical strain energy release rate (GIIc) is derived by applying the compliance-based beam method. This data reduction scheme avoids crack length monitoring during its propagation, which is an advantage in wood. Using a direct method, the shear traction‐separation laws in mode II loading are determined. Full field displacements around the crack tip are monitored by 3D digital image correlation technique, and the crack tip shear displacements are analysed. The proposed method is numerically validated by finite element analysis. Cohesive zone models are developed implementing a shear traction–separation law with exponential damage evolution zone and the average value of the experimental elastic and fracture properties. The numerical results for the different properties including upper and lower limits represent well the experimental data.
Descrição
Part of the work was undertaken during a short-term scientific stay by the first author at the Faculty of Engineering (University of Porto) in 2021, with the financial support provided by Programa Propio de I+D+i 2021 de la Universidad Politécnica de Madrid. The work is part of the R&D&I Project PID2020-112954RA-I00 funded by MCIN/AEI/10.13039/501100011033. The authors gratefully acknowledge also Fundação para a Ciência e a Tecnologia (FCT-MCTES) for the financial support of the Laboratório Associado de Energia, Transportes e Aeronáutica (LAETA) by the project MCIN/AEI/10.13039/501100011033 and the Research and Development Unit for Mechanical and Industrial Engineering (UNIDEMI) by the project UIDB/00667/2020.
Publisher Copyright:
© 2022, The Author(s).
Palavras-chave
Crack propagation Image correlation Separation Strain energy Strain measurement Strain rate Crack tips 3d digital image correlations Beech (Fagus sylvatica L.) Cracks propagation European beech Forestry General Materials Science Plant Science Industrial and Manufacturing Engineering