A carregar...
Projeto de investigação
Sem título
Financiador
Autores
Publicações
Optimal-Enhanced Solar Cell Ultra-thinning with Broadband Nanophotonic Light Capture
Publication . Mendes, Manuel J.; Haque, Sirazul; Sanchez-Sobrado, Olalla; Araújo, Andreia; Águas, Hugo; Fortunato, Elvira; Martins, Rodrigo; DCM - Departamento de Ciência dos Materiais; CENIMAT-i3N - Centro de Investigação de Materiais (Lab. Associado I3N); UNINOVA-Instituto de Desenvolvimento de Novas Tecnologias; Elsevier
Recent trends in photovoltaics demand ever-thin solar cells to allow deployment in consumer-oriented products requiring low-cost and mechanically flexible devices. For this, nanophotonic elements in the wave-optics regime are highly promising, as they capture and trap light in the cells' absorber, enabling its thickness reduction while improving its efficiency. Here, novel wavelength-sized photonic structures were computationally optimized toward maximum broadband light absorption. Thin-film silicon cells were the test bed to determine the best performing parameters and study their optical effects. Pronounced photocurrent enhancements, up to 37%, 27%, and 48%, respectively, in ultra-thin (100- and 300-nm-thick) amorphous, and thin (1.5-mm) crystalline silicon cells are demonstrated with honeycomb arrays of semi-spheroidal dome or void-like elements patterned on the cells' front. Also importantly, key advantages in the electrical performance are anticipated, since the photonic nano/micro-nanostructures do not increase the cell roughness, therefore not contributing to recombination, which is a crucial drawback in state-of-the-art light-trapping approaches.
Multifunctional cellulose-paper for light harvesting and smart sensing applications
Publication . Vicente, António T.; Araújo, Andreia; Mendes, Manuel J.; Nunes, Daniela; Oliveira, Maria J.; Sanchez-Sobrado, Olalla; Ferreira, Marta P.; Águas, Hugo; Fortunato, Elvira; Martins, Rodrigo; UNINOVA-Instituto de Desenvolvimento de Novas Tecnologias; CENIMAT-i3N - Centro de Investigação de Materiais (Lab. Associado I3N); DCM - Departamento de Ciência dos Materiais; RSC - Royal Society of Chemistry
A novel generation of flexible opto-electronic smart applications is now emerging, incorporating photovoltaic and sensing devices driven by the desire to extend and integrate such technologies into a broad range of low cost and disposable consumer products of our everyday life and as a tool to bring together the digital and physical worlds. Several flexible polymeric materials are now under investigation to be used as mechanical supports for such applications. Among them, cellulose, the most abundant organic polymer on the Earth, commonly used in the form of paper, has attracted much research interest due to the advantages of being recyclable, flexible, lightweight, biocompatible and extremely low-cost, when compared to other materials. Cellulose substrates can be found in many forms, from the traditional micro-cellulose paper used for writing, printing and food/beverage packaging (e.g. liquid packaging cardboard), to the nano-cellulose paper which has distinct structural, optical, thermal and mechanical properties that can be tailored to its end use. The present article reviews the state-of-the-art related to the integration and optimization of photonic structures and light harvesting technologies on paper-based platforms, for applications such as Surface Enhanced Raman Scattering (SERS), supporting remarkable 107 signal enhancement, and photovoltaic solar cells reaching ∼5% efficiency, for power supply in standalone applications. Such paper-supported technologies are now possible due to innovative coatings that functionalize the paper surfaces, together with advanced light management solutions (e.g. wave-optical light trapping structures and NIR-to-visible up-converters). These breakthroughs open the way for an innovative class of disposable opto-electronic products that can find widespread use and bring important added value to existing commercial products. By making these devices ubiquitous, flexible and conformable to any object or surface, will also allow them to become part of the core of the Internet of Things (IoT) revolution, which demands systems' mobility and self-powering functionalities to satisfy the requirements of comfort and healthcare of the users.
3D ZnO/Ag surface-enhanced Raman scattering on disposable and flexible cardboard platforms
Publication . Pimentel, Ana; Araújo, Andreia; Coelho, Beatriz J.; Nunes, Daniela; Oliveira, Maria J.; Mendes, M. J.; Águas, Hugo; Martins, Rodrigo; Fortunato, Elvira; CENIMAT-i3N - Centro de Investigação de Materiais (Lab. Associado I3N); DCM - Departamento de Ciência dos Materiais; Molecular Diversity Preservation International (MDPI)
In the present study, zinc oxide (ZnO) nanorods (NRs) with a hexagonal structure have been synthesized via a hydrothermal method assisted by microwave radiation, using specialized cardboard materials as substrates. Cardboard-type substrates are cost-efficient and robust paper-based platforms that can be integrated into several opto-electronic applications for medical diagnostics, analysis and/or quality control devices. This class of substrates also enables highly-sensitive Raman molecular detection, amiable to several different operational environments and target surfaces. The structural characterization of the ZnO NR arrays has been carried out by X-ray diffraction (XRD), scanning electron microscopy (SEM) and optical measurements. The effects of the synthesis time (5-30 min) and temperature (70-130 °C) of the ZnO NR arrays decorated with silver nanoparticles (AgNPs) have been investigated in view of their application for surface-enhanced Raman scattering (SERS) molecular detection. The size and density of the ZnO NRs, as well as those of the AgNPs, are shown to play a central role in the final SERS response. A Raman enhancement factor of 7 × 105 was obtained using rhodamine 6 G (RG6) as the test analyte; a ZnO NR array was produced for only 5 min at 70 °C. This condition presents higher ZnO NR and AgNP densities, thereby increasing the total number of plasmonic "hot-spots", their volume coverage and the number of analyte molecules that are subject to enhanced sensing.
Unidades organizacionais
Descrição
Palavras-chave
Contribuidores
Financiadores
Entidade financiadora
Fundação para a Ciência e a Tecnologia
Programa de financiamento
SFRH
Número da atribuição
SFRH/BD/85587/2012