A carregar...
Projeto de investigação
Sem título
Financiador
Autores
Publicações
Photonic-Enhanced Perovskite Solar Cells
Publication . Almeida, Eva; Alexandre, Miguel; Santos, Ivan M.; Martins, Rodrigo; Águas, Hugo; Mendes, Manuel J.; CENIMAT-i3N - Centro de Investigação de Materiais (Lab. Associado I3N); DCM - Departamento de Ciência dos Materiais; UNINOVA-Instituto de Desenvolvimento de Novas Tecnologias; ACS - American Chemical Society
The current exponential growth of solar electricity technologies toward consumer-oriented applications, as in building- or vehicle-integrated photovoltaics (B/VIPV), is calling for improved solar cells, not only in cost-effectiveness, but also with better adaptability and aesthetics. Here, using perovskite solar cells (PSCs) as test bed, we demonstrate an unprecedented photonic method to generate any color on a cell layout, while also increasing PV efficiency. To this end, photonic surface features were designed for PSCs, which filled the dual purpose of light-trapping (LT) and modulation of reflected light interference. A variety of geometries, from simple gratings to complex semispheroids, were optically optimized for two of the most challenging colors, magenta and green, while assuring the generation of their maximum feasible photocurrent. The best results corresponded to a current density of 22.07 mA/cm2, obtained for the magenta solar cell with top domes, exhibiting an increase of 6.68%, relative to an optimized planar reference cell. In turn, the same type of geometry was able to generate the leading green cell, with up to 21.40 mA/cm2 (a relative increase of 3.44%). Additionally, the uniformity of the optical output of the optimal solar cells was tested under a range of incident light angles, between 0◦ and 60◦, where the current density suffered relative losses only down to 6.65%.
Parylene-Sealed Perovskite Nanocrystals Down-Shifting Layer for Luminescent Spectral Matching in Thin Film Photovoltaics
Publication . Pinheiro, Ana; Ruivo, Andreia; Rocha, João; Ferro, Marta; Pinto, Joana Vaz; Deuermeier, Jonas; Mateus, Tiago; Santa, Ana; Mendes, Manuel J.; Martins, Rodrigo; Gago, Sandra; Laia, César A.T.; Águas, Hugo; VICARTE - Vidro e Cerâmica para as Artes; LAQV@REQUIMTE; CENIMAT-i3N - Centro de Investigação de Materiais (Lab. Associado I3N); UNINOVA-Instituto de Desenvolvimento de Novas Tecnologias; MDPI AG
The present contribution aims to enhance solar cells’ performance via the development of advanced luminescent down-shifting based on encapsulated nanostructured perovskite materials. Here, thin films of inorganic lead halide (CsPbBr3) perovskite nanocrystal luminophores were synthetized, by hot-injection, deposited on glass substrates by spin-coating, and encapsulated with parylene type C, via chemical vapor deposition, to protect and stabilize the films. The optical properties of these thin films were characterized by absorption, emission and 2D contour spectra, their structure by X-ray diffraction and X-ray photoelectron spectroscopy, and the morphology by Scanning Transmission Electron microscopy. I–V curve and spectral response nanocrystalline silicon photovoltaic (nc-Si:H PV) cells were studied in the absence and presence of the perovskite and parylene luminescent down-shifting layers. The incorporation of the CsPbBr3 nanocrystals and their encapsulation with the parylene type C polymeric coating led to an increase in the current generated and the spectral response of the PV cells in the regime of the nanocrystals’ fluorescence emission. A 3.1% increase in the short circuit current density and a 5.6% increase in the power conversion efficiency were observed.
Surface modification of halide perovskite using EDTA-complexed SnO2 as electron transport layer in high performance solar cells
Publication . Marques, Nuno; Jana, Santanu; Mendes, Manuel J.; Águas, Hugo; Martins, Rodrigo; Panigrahi, Shrabani; DCM - Departamento de Ciência dos Materiais; CENIMAT-i3N - Centro de Investigação de Materiais (Lab. Associado I3N); UNINOVA-Instituto de Desenvolvimento de Novas Tecnologias; RSC - Royal Society of Chemistry
The long-term performance of metal halide perovskite solar cells (PSCs) can be significantly improved by tuning the surface characteristics of the perovskite layers. Herein, low-temperature-processed ethylenediaminetetraacetic acid (EDTA)-complexed SnO2 (E-SnO2) is successfully employed as an electron transport layer (ETL) in PSCs, enhancing the efficiency and stability of the devices. The effects of EDTA treatment on SnO2 are investigated for different concentrations: comparing the solar cells' response with 15%-2.5% SnO2 and E-SnO2 based ETLs, and it was found that 7.5% E-SnO2 provided the best results. The improved surface properties of the perovskite layer on E-SnO2 are attributed to the presence of small amount of PbI2 which contributes to passivate the defects at the grain boundaries and films' surface. However, for the excess PbI2 based devices, photocurrent dropped, which could be attributed to the generation of shallow traps due to excess PbI2. The better alignment between the Fermi level of E-SnO2 and the conduction band of perovskite is another favorable aspect that enables increased open-circuit potential (VOC), from 0.82 V to 1.015 V, yielding a stabilized power conversion efficiency of 15.51%. This complex ETL strategy presented here demonstrates the enormous potential of E-SnO2 as selective contact to enhance the perovskite layer properties and thereby allow stable and high-efficiency PSCs.
Unidades organizacionais
Descrição
Palavras-chave
Contribuidores
Financiadores
Entidade financiadora
Fundação para a Ciência e a Tecnologia
Programa de financiamento
3599-PPCDT
Número da atribuição
PTDC/CTM-REF/1008/2020